Animas 1250 pumpers

[spike]

Please list your complaints with the 1250, or Animas.

If you've used a 508 or 515, please list what you like better about the Animas, and what you like less.

[Jgood78]

I have only ever used the Animas 1250 and the only complaint I have is self inflicted. The 200 unit resivor..it runs out too soon.

[archimeech]

compared to the MM508 I used to use, I have no complaints.

Jgood, I usually refill my resevoir about 3 times before actually changing it. It's not recommended, of course, but it works.

One thing about the belt clip that I use, it's the swivel one that comes with the pump and it's rather cumbersome. I do catch my pump on a lot more stuff than I used to with the 508.

[spike]

compared to the MM508 I used to use, I have no complaints.

Jgood, I usually refill my resevoir about 3 times before actually changing it. It's not recommended, of course, but it works.

One thing about the belt clip that I use, it's the swivel one that comes with the pump and it's rather cumbersome. I do catch my pump on a lot more stuff than I used to with the 508.

Hmm...I just asked the rep about a clip. she said there's a clip that doesn't rotate. Is that true? do you have 2 types of clips? I've got 2 different clips with my 515. A slip in rotating type (large) and a svelte belt clip that grips the upper and lower edges of the pump--my favorite.

[jeggeman31]

Hmm...I just asked the rep about a clip. she said there's a clip that doesn't rotate. Is that true? do you have 2 types of clips?

I got my pump in Sept and they sent me to cases. I hard black plastic case that has a clip that rotetes and a leather case that does not have a rotating clip.

[jeggeman31]

I have only ever used the Animas 1250 and the only complaint I have is self inflicted. The 200 unit resivor..it runs out too soon.

Same as the above poster. I wish we had 300 unit resivor because I burn up a 200 unit resivor in no time.

[Cyborg]

Hmm...I just asked the rep about a clip. she said there's a clip that doesn't rotate. Is that true? do you have 2 types of clips? I've got 2 different clips with my 515. A slip in rotating type (large) and a svelte belt clip that grips the upper and lower edges of the pump--my favorite.

My trainer showed me a new clip that is just about to be released to the public. It is very slim line and nothing like the big bulky case-like clip on the swivel that comes with the pump.

[jeggeman31]

My trainer showed me a new clip that is just about to be released to the public. It is very slim line and nothing like the big bulky case-like clip on the swivel that comes with the pump.


Did they say when it was going public ?

[Dewey]

Please list your complaints with the 1250, or Animas.

If you've used a 508 or 515, please list what you like better about the Animas, and what you like less.

I truly like the Animas, in terms of size & functionality. The 508 was a good pump, but the Paradigm series just didn't cut it for me (for a multitude of reasons). If I were given a choice between the 515 & the 1250, I'd be way more likely to go for the 1250. The only con that I've experienced with it is that there currently is no screen saver, so when the pump's display is in "sleep mode," nothing is displayed on the screen. I'm one who tends to prefer to see something on display. I have a list that I've posted before that you may have seen. I'll repost it, just in case. Again, as I Always say, these pros/cons are based on personal experience & fellow user input, so it's only for reference purposes:

Animas IR-1250 Pros:
1. Smallest pump, easy to handle and use
2. Large display screen, very easy to read (contrast can be changed to darken/lighten text)
3. Can use almost any Luer-lock infusion set
4. Often comes with free products and/or accessories
5. Really Cool color (& custom) covers
6. With the 1250, users can customize tone alarms - Cool for kids of Any age)
7. Has a variety of bolus options (Normal, CarbSmart, ezBG, Combo Bolus, as well as reminders) - and Insulin On Board feature (IOB)
8. Can set BG reminders
9. Can download up to 500 foods from food database to pump along with carb amounts
10. Very durable, sturdy
11. Animas working on closed-loop system and implantable glucose meter, will hopefully release Micro-Pump next year (recently joined with Johnson & Johnson, as well as currently working with DeBiotech on the Micro-Pump)
12. Excellent customer service
13. Best battery life of all pumps on market
14. Not locked into using one brand of meter
15. Interest-free Payment plans available
16. Display Backlight can be turned on/off at user's discretion

Animas cons:
1. 2ml reservoir may not last as long, depending on user's daily insulin intake
2. No meter to attach to pump or remote
3. There have been some complaints from users about stinging at the sites (due to insulin delivery being "too swift" - not too much insulin, just too quick of a delivery)

Minimed 515/715 Pros:
1. Comes with meter - communicates via RF
2. can choose to either use 515 with 1.8ml res. or 715 with 3ml
3. Has indiglo backlight
4. Small pump
5. Cool colors available (Purple, blue, black smoke and frost)
6. Has clock and battery life on "screen saver", as well as reservoir capacity
7. Working on closed loop system
8. Working on pump to sensor communication (instead of using separate meter) - for 522 pump
9. Battery life ok
10. Pretty sturdy pumps
11. Insulin On Board feature (IOB) (customizable on 515/715)
12. Remote for discreet usage
13. New ThinSet reservoir recently released by Applied Diabetes Research (ADR) that should allow use of luer lock sets. Here's the site that shows a picture of the new reservoirs for the MM515/715 pumps: http://www.applieddiabetesresearch.org/model332_326consumer.html

Minimed Cons:
1. Customer service sometimes sketchy (some have major billing or other customer service issues)
2. Some users feel locked into using one (BD) brand of meter (if used)
3. Locked into using Proprietary infusion sets (limits user choices), if new ADR ThinSet reservoirs are not used
4. Battery life not necessarily as long (sometimes as low as 3 weeks, depending on enabled features). Some users have had great luck with battery life, others have not.

Hmm...I just asked the rep about a clip. she said there's a clip that doesn't rotate. Is that true? do you have 2 types of clips? I've got 2 different clips with my 515. A slip in rotating type (large) and a svelte belt clip that grips the upper and lower edges of the pump--my favorite.
:hmmmm: She must have been talking about the IR-1000 clip (which actually screws in & does not rotate), or the IR-12xx series leather case (which has a hard belt clip that doesn't rotate). Other than those, the IR-1250 holster rotates all the way around.

Did they say when it was going public ?
Hey Jim,

They said (according to the presentation I attended) that the Micro-Pump is supposed to be released late 2007 (in the last quarter).....this came from a rep./pumper who's currently on the 1250. Hopefully they won't run into any snags and will have Everything ironed out & ready to roll in the time frame they provided. :thumbsup:

[jeggeman31]

They said (according to the presentation I attended) that the Micro-Pump is supposed to be released late 2007

O the micro pump, I thought the poster was talking about just a new case that Animas was coming out with.


Thanks

[Cyborg]

Did they say when it was going public ?

Unfortunately, no. But the people at animas have been very helpful so far. Maybe a phone call or email might get you one. I haven't worn my pump on a belt clip yet. But the clip was way cooler than the one they currently ship. It clips on and off instantly.

I jerry-rigged a little pouch attached to one of those conference badge clips that go around your neck. I wear mine like a badge of honor and let the tubing come up from the front top of my shirt. If I go out in a public place and feel uncomfortable, I'll just drop it under my shirt. It's just more convenient and easier to get to. At night it goes into a waist-it so it's nice and snug against my body. No flopping around while I sleep.

[jeggeman31]

Well I went ahead and sent them an email asking, just to get things cleared up. I will post their response when I get it

[Poe]

yeah, the 200 u/reservoir is the only drawback i have with this pump... however, i'm so used to changing sites out every 3rd day that if i keep it in longer the site does itch.

[Dewey]

O the micro pump, I thought the poster was talking about just a new case that Animas was coming out with.


Thanks
My bad, LOL. :stupido2:

[JediSkipdogg]

I just have one question, and sorry if this comes off harshly. But can I ask why there's a post asking for the cons of an Animas pump? Yet no post asking about the cons of a MM pump? Maybe I'm reading this wrong, but it seems like up until Dewey's post, this thread is one sided. Maybe it's just me.

[Cyborg]

Cons: It doesn't upload all the data!!!

[Cyborg]

Specifically, the pump does not store the carb intake data thus the software for the pc cannot upload it.

Also, the software for the pc is kinda rough and rounds times and merges or drops values when multiple bg readings are taken close together.

[jeggeman31]

I just have one question, and sorry if this comes off harshly. But can I ask why there's a post asking for the cons of an Animas pump? Yet no post asking about the cons of a MM pump? Maybe I'm reading this wrong, but it seems like up until Dewey's post, this thread is one sided. Maybe it's just me.

Well I think it may be because the person who started this thread is pumping with a mini med and may want to go to Animas ?

Mini Med Vs Animas
:boxing:

But please correct me if I am wrong, it would not be the first time

[jeggeman31]

yeah, the 200 u/reservoir is the only drawback i have with this pump... however, i'm so used to changing sites out every 3rd day that if i keep it in longer the site does itch.

Do you change your site and reservoir at the same time ? I change out my site ever 2 days and my reservoir about ever 1 1/2 to 2 days now as I have seen an increase in my insulin intake

[spike]

My trainer showed me a new clip that is just about to be released to the public. It is very slim line and nothing like the big bulky case-like clip on the swivel that comes with the pump.


Thanks! (on the clip info--I really, really want a small clip) I just got a call from my endo's office--they are giving my name to the local rep so I can see the pump in person.

[spike]

Cons: It doesn't upload all the data!!!


can you upload all the user settings to your pc so that if there's a problem or you get a replacement pump, you can download all the basals, etc to the new pump?

[spike]

yeah, the 200 u/reservoir is the only drawback i have with this pump... however, i'm so used to changing sites out every 3rd day that if i keep it in longer the site does itch.


I'm content with 3 day changes and unless I've had a cortisone shot, 180-200U will cover me for 3 days. In fact, when I'm on the straight and narrow, I require only 120U for 3 days. Now if I could just STAY on the S&N... :)

[jeggeman31]

Please list your complaints with the 1250, or Animas.




Spike just wondering why is it you want the complaints listed and not the good things about the pump ?

[spike]

Spike just wondering why is it you want the complaints listed and not the good things about the pump ?


I've already read about most of the features and have heard good things. I'm getting REAL serious now about getting one and so I would like to know if there are any "gotchas". I'm past the point of mild interest now. More closer to actually ordering one!

[jeggeman31]

I've already read about most of the features and have heard good things. I'm getting REAL serious now about getting one and so I would like to know if there are any "gotchas". I'm past the point of mild interest now. More closer to actually ordering one!

Have you tried calling the local rep to see if you could test drive one for a week or so ? I would think that if they wanted to make a sale they would let you use one to see if it is something you like.

[spike]

Have you tried calling the local rep to see if you could test drive one for a week or so ? I would think that if they wanted to make a sale they would let you use one to see if it is something you like.


Hey, that's a great idea. that would be much better than just playing with it for a little while. I'll ask as soon as the rep gives me a call. thanks. that hadn't even occured to me.

[Cyborg]

I've only had mine for 10 days, so I'm still learning all the bells and whistles. I still haven't played with all the features of the pump or the pc software. I do like it, but since I'm a first time pumper, I have nothing to compare it to. For me the waterproof feature and the food database were two strong points (even though I haven't yet used either). I also heard the battery life is better than some of the other pumps, but I may be wrong. I'm surprised more animas pump users haven't chimed in yet...

[spike]

I've only had mine for 10 days, so I'm still learning all the bells and whistles. I still haven't played with all the features of the pump or the pc software. I do like it, but since I'm a first time pumper, I have nothing to compare it to. For me the waterproof feature and the food database were two strong points (even though I haven't yet used either). I also heard the battery life is better than some of the other pumps, but I may be wrong. I'm surprised more animas pump users haven't chimed in yet...

I get 6 weeks out of a battery and they are dirt cheap for the MM--AAA.
Waterproof (probably water"tight") would be nice, although I swim with my MM. I explained the reasons for doing so before but don't remember if you were in that thread.

[Cyborg]

Does the MM also take lithium batteries or just alkaline? The animas will take either.

[jeggeman31]

I get 6 weeks out of a battery .

I went live with my pump September 7th and I just put my 2nd battery in about 2 weeks ago or so.

[JediSkipdogg]

I went live with my pump September 7th and I just put my 2nd battery in about 2 weeks ago or so.

I've been on two bars for my Animas IR 1200 since mid-january. It still hasn't showed 1 bar or said battery low, so I keep ticking away with it. I think I can go 5 or 6 months on my IR 1200 with no need to replace on one Energizer AA Lithium. It also takes a standard AA, but I've had no need to try those yet. My insurance pays for AA Lithiums from Animas.

I have no cons on any Animas pumps in the 3.25 years I've been with them. They have been great and they use to call every 3 months to remind you to order supplies. Now since everyone is going digital (computers) they now email me to remind me and I can log onto their site and order whatever supplies I want. If they have questions about my order (like if I try to order more supplies than my insurance will pay) they give me a call to confirm it. Never had any problems, not even when they had the infamous cracking belt clip on the IR 1000. They sent me new clips whever it broke and even once sent me 3 so I had future ones left.

Again, no cons with Animas or the IR 1200 yet.

[spike]

Does the MM also take lithium batteries or just alkaline? The animas will take either.


The ONLY battery that works correctly is an Energizer AAA. Not even Duracells will work. they last about 4-6 days and then the pump will suddenly stop running and can't be restarted unless a fresh battery is installed. the heck of it is, is that the Duracell's terminal voltage is still close to 1.5VDC. Around 1.46-1.48. the pump thinks the battery is low, but it really isn't. some sort of sensing problem.

[spike]

I've been on two bars for my Animas IR 1200 since mid-january. It still hasn't showed 1 bar or said battery low, so I keep ticking away with it. I think I can go 5 or 6 months on my IR 1200 with no need to replace on one Energizer AA Lithium. It also takes a standard AA, but I've had no need to try those yet. My insurance pays for AA Lithiums from Animas.

I have no cons on any Animas pumps in the 3.25 years I've been with them. They have been great and they use to call every 3 months to remind you to order supplies. Now since everyone is going digital (computers) they now email me to remind me and I can log onto their site and order whatever supplies I want. If they have questions about my order (like if I try to order more supplies than my insurance will pay) they give me a call to confirm it. Never had any problems, not even when they had the infamous cracking belt clip on the IR 1000. They sent me new clips whever it broke and even once sent me 3 so I had future ones left.

Again, no cons with Animas or the IR 1200 yet.

How about durability? I've dropped my pumps from time to time. I only ruined one by dropping it and that was onto concrete.

[jenet]

I love my Animas because it seems pretty intuitive to use, but here's a few things that caught me by surprise:

When you set the hourly rates in your basal program, you can set the time for each segment and make each segment what ever length of time you want. But when you set the Insulin to Carb Ratios and the Insulin Sensitivity Factors, those have predefined start times in 4 hour blocks for each slot that can't be changed (12:00 AM, 4:00 AM, 8:00 AM, etc.). If your I:C or ISF changes in the middle of one of these blocks, you will need to override it in the bolus wizards. (I override my ISF for lunch if it's before 12:00 PM.)

The CarbSmart detail information about number of carbs, bolus for food, BG, IOB and correction bolus adjustment amount based on BG is not accessible in the History - just the total amount bolused. If it's there, it's a state secret. Same thing for the ezBG detail info - no BG and IOB are in the History, only the total correction bolused.

I don't know how this compares with other pumps. As a brand new pumper, these haven't been a problem (yet), but it was a surprise when I first went through the settings and the history during my saline trial.

And yes, I would really like it if the software would run on a Mac in addition to running on Windows, so I could personalize some of the otherwise non-accessible pump settings and download my numbers instead of writing them down and putting them in an Excel spreadsheet. ;)

cheers,
j

[chs4]

Specifically, the pump does not store the carb intake data thus the software for the pc cannot upload it. I've emailed them a couple of times about this and also mentioned it to the rep. They say they'll try to work on it for the next software update. We'll see... http://www.iamviet.com/forum/images/smilies/smilie_yellow_icon_rolleyes.gif

can you upload all the user settings to your pc so that if there's a problem or you get a replacement pump, you can download all the basals, etc to the new pump?Yes, you can, and it's relatively easy. (though a bit slow)

[spike]

I love my Animas because it seems pretty intuitive to use, but here's a few things that caught me by surprise:

When you set the hourly rates in your basal program, you can set the time for each segment and make each segment what ever length of time you want. But when you set the Insulin to Carb Ratios and the Insulin Sensitivity Factors, those have predefined start times in 4 hour blocks for each slot that can't be changed (12:00 AM, 4:00 AM, 8:00 AM, etc.). If your I:C or ISF changes in the middle of one of these blocks, you will need to override it in the bolus wizards. (I override my ISF for lunch if it's before 12:00 PM.)

The CarbSmart detail information about number of carbs, bolus for food, BG, IOB and correction bolus adjustment amount based on BG is not accessible in the History - just the total amount bolused. If it's there, it's a state secret. Same thing for the ezBG detail info - no BG and IOB are in the History, only the total correction bolused.

I don't know how this compares with other pumps. As a brand new pumper, these haven't been a problem (yet), but it was a surprise when I first went through the settings and the history during my saline trial.

And yes, I would really like it if the software would run on a Mac in addition to running on Windows, so I could personalize some of the otherwise non-accessible pump settings and download my numbers instead of writing them down and putting them in an Excel spreadsheet. ;)

cheers,
j

Interesting...and thanks!

The MM pumps allow you to set the sensitivity to any block of hours you'd like. Up to 8 blocks in 1/2 hour increments. very flexible.

[JediSkipdogg]

The ONLY battery that works correctly is an Energizer AAA. Not even Duracells will work. they last about 4-6 days and then the pump will suddenly stop running and can't be restarted unless a fresh battery is installed. the heck of it is, is that the Duracell's terminal voltage is still close to 1.5VDC. Around 1.46-1.48. the pump thinks the battery is low, but it really isn't. some sort of sensing problem.

I have used a Duaracell once in my pump and no problem. With the IR 1200 you just go into the settings and tell it if you are using a Lithium or an Alkaline battery (unfortunately it doesn't autodetect it.) But I have not had a problem with using any brand name battery. Energizer Lithium work the best though and last 5+ months, which for paying $3-4 per battery is worth it.

How about durability? I've dropped my pumps from time to time. I only ruined one by dropping it and that was onto concrete.

I have dropped mine numerous times. There are scratches on mine and I've never had a problem. I even once dropped it, put a large scratch on the screen, had to call Animas a few months down the road for another problem (the infamous IR 1200 fading screen, now fixed of course) and I told them it had a scratch on the screen. They said it was not a problem, replaced my pump for the warranty problem, and never made me pay for the scratched screen. Most of my times I drop and the cord catches, but a few times I've dropped and it's hit hard floors and never cracked.


When you set the hourly rates in your basal program, you can set the time for each segment and make each segment what ever length of time you want. But when you set the Insulin to Carb Ratios and the Insulin Sensitivity Factors, those have predefined start times in 4 hour blocks for each slot that can't be changed (12:00 AM, 4:00 AM, 8:00 AM, etc.). If your I:C or ISF changes in the middle of one of these blocks, you will need to override it in the bolus wizards. (I override my ISF for lunch if it's before 12:00 PM.)

The CarbSmart detail information about number of carbs, bolus for food, BG, IOB and correction bolus adjustment amount based on BG is not accessible in the History - just the total amount bolused. If it's there, it's a state secret. Same thing for the ezBG detail info - no BG and IOB are in the History, only the total correction bolused.


I agree the hour rates for carb ratios and insulin sensitivitely are a pain. I was told those are being addressed in the IR 1275 when it finally comes out.

And I thought someone said the history on the 1250 showed BG and carb readings if you put them in. Was that you jeggeman? Or do you remember what it was that the 1200 didn't show but yours (1250) did?

[jeggeman31]

And I thought someone said the history on the 1250 showed BG and carb readings if you put them in. Was that you jeggeman? Or do you remember what it was that the 1200 didn't show but yours (1250) did?

It was me, however it was not about showing the BG and Carb readings. However I can't for the life of Spike remember what it was the thread was about.;)

[jeggeman31]

Was it in the history it shows what kind of bolas it was from like a Normal bolus, Combo bolus, EZbg bolus or Carb bolus ?

[spike]

It was me, however it was not about showing the BG and Carb readings. However I can't for the life of Spike remember what it was the thread was about.;)


Me either! We'll just go with the flow...

[spike]

I have used a Duaracell once in my pump and no problem. With the IR 1200 you just go into the settings and tell it if you are using a Lithium or an Alkaline battery (unfortunately it doesn't autodetect it.)

The Duracell is a problem in the paradigms. I use duracells for everything else, which is to say about 4,673 different gadgets. and clocks...don't get me started on how ticked i get when we have to set the clocks forwards and backwards. we are over 40 items we have to reset. someday all devices should link to Colorado's atomic time. we've got only 2 clocks that received radio signals from Colorado. I love 'em!

[jenet]

Was it in the history it shows what kind of bolas it was from like a Normal bolus, Combo bolus, EZbg bolus or Carb bolus ?
Oh, and that's another bolus missing detailed info in the History screen. I've only done one Combo bolus, so I didn't think about it, but the History doesn't show you how you split the Combo bolus or its duration, only the total Combo bolus and the fact that it was "Completed" (or not completed, presumeably).

I don't mean to sound picky, but as an IT professional with many, many years of systems development experience, it makes me crazy when systems collect detailed data, use that data for a calculated result, and save only that end result - tossing the details into the bit bucket.

cheers,
j

[Cyborg]

I sent am email to Animas about the pump firmware and the pc software. Here is part of my email to them:

When is the next version of the software coming out? Or a patch? There
are alot of limitations of the software. I could make a list. For
example, just to list a couple, the software does not import all the
data from the meters or the pump, and the software rounds the times and
does not give the exact times.

Here is the relevant part of the response:

Thank you for taking the time to send in your feedback. Your
suggestions are good ones and I will forward on to the development team.
Meanwhile, I'll try to address some of your comments.

ezManager Plus does import all the pump data that is stored in history.
My top feature request for the next pump is to store carb and BG values
so they can be downloaded by ezManager.

On the Logs option, you can view and print each value that has been
entered, along with a time and date stamp that is not averaged, nor the
value rounded. These reports aren't formatted as nicely but the
information is available.

I will be glad to keep your name on file and ensure you receive the
latest version, when it is available - I expect it late this summer.

Thanks again for writing - customer feedback is what helps us continue
to improve our products.

Based on this, I gathered that the pump does not store all of the data. The pc software pulls all of the data that is stored on the pump. Thus, to become better, they must update the pump firmware and the pc software together...

[condensr]

Spike-

Might I ask why you are thinking of switching from the 515? I'm leaning toward the Animas right now, but the lack of carb and BG history is a real downer as far as I'm concerned. I would wonder if the IR1275 code will be usable on the IR1250, like the 1250 code was usable on the 1200s (albeit with less memory).

[Cyborg]

Spike-

Might I ask why you are thinking of switching from the 515? I'm leaning toward the Animas right now, but the lack of carb and BG history is a real downer as far as I'm concerned. I would wonder if the IR1275 code will be usable on the IR1250, like the 1250 code was usable on the 1200s (albeit with less memory).

You can get the bg history from your glucose meter. It's just the carb history that you are missing. I'm hoping that Animas comes out with a firmware update for the 1250. Keep in mind that the person that responded to my email was from the pc software side, not the pump firmware side.

Perhaps an another email to the correct group at Animas could get more information whether the 1250 will ever store carb history intake since this information is very important. I would certainly hope the 1275 would have it. I believe Animas has an upgrade program, but I am not positive about that.

[JediSkipdogg]

You can get the bg history from your glucose meter. It's just the carb history that you are missing. I'm hoping that Animas comes out with a firmware update for the 1250. Keep in mind that the person that responded to my email was from the pc software side, not the pump firmware side.

Perhaps an another email to the correct group at Animas could get more information whether the 1250 will ever store carb history intake since this information is very important. I would certainly hope the 1275 would have it. I believe Animas has an upgrade program, but I am not positive about that.

I was told by them a few months ago it will be in the 1275 and that they will do the same thing they did with the 1200. For around $200 you can upgrade the 1250 to the 1275 in simple terms and just make it a 1250+.

[Cyborg]

I was told by them a few months ago it will be in the 1275 and that they will do the same thing they did with the 1200. For around $200 you can upgrade the 1250 to the 1275 in simple terms and just make it a 1250+.

Nice! My co pay was only 100$ to begin with... :)

[mwalt2]

My only complaint about the IR 1250 is that the sound isn't very loud (though I'm sure for important alarms it is - my trainer said something about an emergency siren if you don't respond to the important alarms lol). It takes the alarm going off (low cartridge, etc) for a minute or two for me to realize it. As far as storing carb info., you can use the One Touch Ultra Smart to enter the amount of carbs when you eat (handy if you check right before eating) and the EzManager software will download the carb total/time and display them in the readouts/charts. I've been pumping since Oct. 3rd, 2005 and have had no alarms other than low cartridge and a low battery that just happened last week (first battery lasted about 4.5 months).

[spike]

My only complaint about the IR 1250 is that the sound isn't very loud (though I'm sure for important alarms it is - my trainer said something about an emergency siren if you don't respond to the important alarms lol). It takes the alarm going off (low cartridge, etc) for a minute or two for me to realize it. As far as storing carb info., you can use the One Touch Ultra Smart to enter the amount of carbs when you eat (handy if you check right before eating) and the EzManager software will download the carb total/time and display them in the readouts/charts. I've been pumping since Oct. 3rd, 2005 and have had no alarms other than low cartridge and a low battery that just happened last week (first battery lasted about 4.5 months).


Would someone who has heard the alarms on both the Paradigm pump and the 1250, comment on the relative loudness, please?

[Shotokan]

... when you set the Insulin to Carb Ratios and the Insulin Sensitivity Factors, those have predefined start times in 4 hour blocks for each slot that can't be changed (12:00 AM, 4:00 AM, 8:00 AM, etc.)....

I don't know how this compares with other pumps. As a brand new pumper, these haven't been a problem (yet), but it was a surprise when I first went through the settings and the history during my saline trial.j

I'm not a pumper, but I've been researching pumps. I think the Cozmo does the best job with the I:C ratios because you can set up to 12 "custom meals." For example, you can set separate I:C ratios for breakfast, lunch, and dinner and use them at any time. I take Symlin when my meal has at least 30 grams of carbs, but my I:C ratio gets cut in half. So I could set up separate meals "breakfast with Symlin", "breakfast without Symlin", and so on, each with a different I:C ratio. Then select the "meal" that I needed regardless of the time of day that I ate it. Another advantage is that I wouldn't have to change the time on my pump when I travel to a different time zone, like from the west coast to the east coast.

[Poe]

jeggeman31,

Yes, I change both reservoir and infusion set at the same time. On a rare occasion, when I am getting really good absorption I may extend the infusion to 4 days. Also, depending on intake I can extend to 2 1/2 days.

[AnimasPumper06]

so any news on the new belt clip

it seems as it has been almost a year that they have been testing this great belt clip, but they dont wanna give it to us

and also no 1275 upgrade yet either

[JediSkipdogg]

and also no 1275 upgrade yet either

Not happening. With the merger/buyout with J&J they decided to scrap the 1275 and just work full steam on the IR 1500, aka Micropump aka Nanopump to be released late 2007.